A Sedikit Pengalaman dari Menemukan Listrik Peralatan Kebocoran Cepat dengan Multimeter
As we all know% 2c th kebocoran fenomena of electric equipment may happen at any time% 2c how to find the leakage phenomenon in time% 3f Here are a few simple methods% 2c you may wish to give it a try.
Pertama, use a multimeter to measure the leakage voltage, put the multimeter switch on the AC voltage measurement position, generally in the AC voltage 250V position, then insert the black test lead into the soil near the device under test, and connect the red test lead to the metal of the device. on the shell. At this time, look at indicator on the multimeter. If the needle does not move, you can change it to a low gear one by one until the specific data is indicated, which is the leakage voltage of the device. If there is still no indication when the test pen is at the lowest level, it means that the device has no leakage.
Second, use an electroscope to check for leakage. The inspector directly connects the electroscope pen with the metal shell of the electrical equipment. When the neon tube in the electroscope pen lights up, it means that the equipment has leakage and the leakage voltage is high. When the neon tube is not bright, it does not mean that the equipment has no leakage. It may be that the leakage voltage is low dan the neon tabung cannot light up% 2c or there may be no kebocoran tegangan.
Third, when there is no multimeter and electroscope pen, you can touch the metal casing of the electrical equipment with the back of your hand. When there is mati rasa atau listrik shock, it berarti itu perangkat has kebocoran tegangan. Kapan ada adalah an listrik shock, you must be waspada, itu kebocoran tegangan adalah relatif tinggi. Ini adalah perlu berhenti mesin untuk periksa dan analisis itu alasan% 2c dan gunakan itu setelah pemecahan masalah% 2c jika tidak ada mungkin menjadi an listrik shock kecelakaan.
