Pengukuran pintar (AUTO)

 This measurement mode is default when power on. In this mode, DC voltage, AC voltage, resistance, continuity can be measured, and the meter can automatically identify the measurement signal.

1) Press POWER ON key to power on, display AUTO  and enter the intelligent measurement mode.

2) Insert the red probe into " INPUT " jack and the black probe into the "COM" jack.

3) Hubungi probe probe dengan kedua ujung catu daya atau resistansi yang diukur (paralel), dan meter akan secara otomatis mengenali sinyal yang diukur.

4) When measuring the resistance, the resistance value is less than about 50 Ω The buzzer sounds and the indicator light is on.

5) Baca hasil dari tampilan.

CATATAN:Tegangan terukur minimum dari mode ini: 0.8V

GVDA Multimeter Digital Baru T-RMS Rentang Otomatis AC DC NCV LCD Warna Smart Multimetro Tester Ohm Kapasitansi Hz Temp Voltage Meter GD119B: