Cara mengoperasikan meteran klem dengan benar
Saat menggunakan penjepit ammeter untuk mengukur arus, perlu untuk menjepit kawat yang diuji (kawat) jika dua garis paralel dimasukkan, arus tidak dapat dideteksi sebagai tambahan, ketika menggunakan pusat penjepit ammeter (inti besi) untuk dideteksi, kesalahan deteksi lebih kecil ketika memeriksa daya konsumsi peralatan rumah tangga, menggunakan pemisah garis lebih mudah. Some line separators can amplify the detection current by 10 times, so currents below 1A can be amplified before detection When using a DC clamp ammeter to detect DC current (DCA), if the current flows in the opposite direction, it will display a negative value This function can be used to detect whether the car's battery is in a charged or discharged state
Deteksi Nilai Efektif Sejati
The clamp ammeter with average value method detects the average value of sine wave through AC detection, and displays the amplified value after 1.11 times (sine wave AC) as the effective value The waveforms other than sine waves and skewed waves with different waveform rates are also amplified 1.11 times and displayed, resulting in indication errors Therefore, when detecting waveforms and distortions other than sine waves, please use a clamp ammeter yang dapat secara langsung menguji nilai efektif yang sebenarnya
Deteksi kebocoran
Deteksi bocor berbeda dari deteksi arus khas, seperti dua (fase tunggal 2- tipe kawat) atau tiga (fase tunggal 3- tipe kawat, tiga fase 3- tipe kawat) perlu dijepit bersama. Kawat pentanahan juga dapat dijepit untuk menguji metode manajemen isolasi untuk mendeteksi arus kebocoran pada sirkuit tegangan rendah telah menjadi sarana penilaian utama sejak konfirmasi dengan revisi 1997 Standar Teknis Peralatan Listrik, kebocoran Meter saat ini secara bertahap telah digunakan untuk deteksi pada bangunan dan pabrik-pabrik yang tidak dapat dimakamkan.
